IMAGIC WEAVE® two different LED Technologies

IMAGIC WEAVE® LED Technologies

IMAGIC WEAVE® HE (High Efficiency) is a combination of HAVER Architectural Mesh and SMT-LED-profiles with perfect color mixing.

The IMAGIC WEAVE® HE SMT system is ideal for night time presentations and suitable for daytime presentations in certain conditions. Direct sunlight may affect the video content, however on cloudy days the representation of content is good.

The LED profiles are available in standard horizontal pixel pitch of 40 mm, 50 mm or 62.5 mm. In addition to synchronous distances asynchronous distances are also possible (e.g.: 40 mm x 105 mm, 50 mm x 80 mm, etc.).

IMAGIC WEAVE® HE – SMT Technologie

IMAGIC WEAVE HE – SMT Technology
IMAGIC WEAVE HE – SMT Technology

Advantages:

  • Broad viewing angles
  • Perfect color mixing
    (also from shorter viewing distances)

Surface-Mount Technology (SMT)

With the Surface-Mount Technology (SMT) electronic components are soldered directly onto the surface of the printed circuit boards (PCB). A board which is produced according to this technology is called Surface-Mount Device (SMD).

Technical Data

Light source:SMT RGB LEDs (2 SMT LEDs per pixel)
Color resolution:3 x 16-bit (gamma correction)
Beam angle:110°
LED Pitch horizontal:40 mm, 50 mm, 62.5 mm
(other distances on request)
LED Pitch vertical:free selectable, from ~ 30 mm
Brightness:40mm x 40mm pitch: 2200 nits (cd/m2)
50mm x 50mm pitch: 1400 nits (cd/m2)
62.5mm x 62.5mm pitch: 900 nits (cd/m2)
Housing:stainless steel tubes with silicone potting
Operating Temperature:-30°C to +60°C
Storage Temperature:-40°C to +70°C
Environment:Outdoor (IP67), UV resistant

IMAGIC WEAVE® HO (High Output) is a combination of HAVER Architectural Mesh and THT-LED-profiles with excellent high brightness.

Depending on the pixel pitch the IMAGIC WEAVE® HO THT system is fully suitable for daylight presentations.

The LED profiles are available in standard horizontal pixel pitch of 40 mm, 50 mm or 62.5 mm and are capable of a wide range of resolutions in full colour at various brightness levels. In addition to synchronous distances asynchronous distances are also possible (e.g.: 40 mm x 105 mm, 50 mm x 80 mm, etc.).

IMAGIC WEAVE® HO – THT Technologie

IMAGIC WEAVE® HO – THT Technology
IMAGIC WEAVE® HO – THT Technology

Advantages:

  • Excellent high brightness
  • Suitable for daylight presentations

Through-Hole Technology (THT)

With Through-Hole Technology (THT) holes are drilled into the printed circuit boards (PCB) and the contact pins are put through the holes and brazed on the opposite side. A board which is produced according to this technology is called a Through-Hole Device (THD).

Technical Data

Light source:THT RGB LEDs (6 LEDs per pixel)
Color resolution:3 x 16-bit (gamma correction)
Beam angle:105° x 50°
LED Pitch horizontal:40 mm, 50 mm, 62.5 mm
(other distances on request)
LED Pitch vertical:free selectable, from ~ 30 mm
Brightness:40mm x 40mm pitch: 8400 nits (cd/m2)
50mm x 50mm pitch: 5400 nits (cd/m2)
62.5mm x 62.5mm pitch: 3400 nits (cd/m2)
Housing:stainless steel tubes with silicone potting
Operating Temperature:-30°C to +60°C
Storage Temperature:-40°C to +70°C
Environment:Outdoor (IP67), UV resistant
Top